将Feature/XP.Common和Feature/XP.Hardware分支合并至Develop/XP.forHardwareAndCommon，完善XPapp注册和相关硬件类库通用类库功能。

2026-04-16 17:31:13 +08:00
parent 6ec4c3ddaa
commit 2bd6e566c3
581 changed files with 74600 additions and 222 deletions
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+  <appSettings>
+    <!-- PLC 连接配置 | PLC Connection Configuration -->
+    <add key="Plc:IpAddress" value="192.168.1.100" />
+    <add key="Plc:Port" value="102" />
+    <add key="Plc:Rack" value="0" />
+    <add key="Plc:Slot" value="1" />
+    <!-- PlcType 可选值 | Available values: S200Smart, S300, S400, S1200, S1500 -->
+    <add key="Plc:PlcType" value="S1200" />
+
+    <!-- 批量读取 DB 块配置 | Bulk Read DB Block Configuration -->
+    <!--
+      ReadDbBlock: 周期性批量读取的 DB 块标识（如 "DB1"）
+                   信号地址落在 [ReadStartAddress, ReadStartAddress+ReadLength-1] 范围内时走缓存读取
+                   其他 DB 块或超出范围的信号自动走单点读取
+      ReadDbBlock: DB block identifier for periodic bulk read (e.g. "DB1")
+                   Signals within [ReadStartAddress, ReadStartAddress+ReadLength-1] use cache read
+                   Other DB blocks or out-of-range signals use single-point read automatically
+    -->
+    <add key="Plc:ReadDbBlock" value="DB1" />
+    <add key="Plc:ReadStartAddress" value="200" />
+    <add key="Plc:ReadLength" value="200" />
+
+    <!--
+      BulkReadIntervalMs: 批量读取周期（毫秒），控制 PLC 数据缓存刷新频率
+      BulkReadIntervalMs: Bulk read interval (ms), controls PLC data cache refresh frequency
+    -->
+    <add key="Plc:BulkReadIntervalMs" value="100" />
+
+    <!--
+      注意：WriteDbBlock 配置项已移除。
+      写入地址由信号所属 Group 的 DBNumber 自动决定，无需单独配置。
+      Note: WriteDbBlock config has been removed.
+      Write address is determined automatically by the signal's Group DBNumber.
+    -->
+
+    <!-- PLC 超时配置 | PLC Timeout Configuration -->
+    <add key="Plc:ConnectTimeoutMs" value="5000" />
+    <add key="Plc:ReadTimeoutMs" value="3000" />
+    <add key="Plc:WriteTimeoutMs" value="3000" />
+
+    <!-- 自动重连（每 5 秒检测连接状态）| Auto Reconnection (checks every 5 seconds) -->
+    <add key="Plc:bReConnect" value="true" />
+
+    <!--
+      信号定义文件路径（可选，默认为运行目录下的 PlcAddrDfn.xml）
+      Signal definition file path (optional, defaults to PlcAddrDfn.xml in app directory)
+    -->
+    <!-- <add key="PlcAddrDfnXmlPath" value="C:\Config\PlcAddrDfn.xml" /> -->
+  </appSettings>
+</configuration>