;------------------------------------------------------------------------------
; Help for Control/Value entries
;
; DataType= (FXDataType)
;   0 FX_INT
;   1 FX_LONG
;   2 FX_UINT
;   3 FX_ULONG
;   4 FX_FLOAT
;   5 FX_DOUBLE
;   6 FX_BOOL
;   7 FX_CENTTABLE
;   8 FX_FOCUSTABLE
;   9 FX_STRING
;  10 FX_SHORT
;  11 FX_USHORT
;  12 FX_SCANTABLE
;  13 FX_BYTE
;  14 FX_UBYTE
;  15 FX_TUBECURRENTTABLE
;  16 FX_AXESPOSTABLE
;
; ValueType= (FXValueType)
;   0 FX_ACTVAL
;   1 FX_NOMVAL
;   2 FX_MINVAL
;   3 FX_MAXVAL
;   4 FX_BOOLVAL
;   5 FX_ERRORVAL
;
; Active=
;   0 Variable will not be updated in process image of FXE DLLs
;     and can only accessed with explicit read/write
;   1 Variable will be updated in process image of FXE DLLs
; Notify=
;   0: Application notifying will not be used for this variable
;   1: Application notifying will be used for this variable

;System- und Options-Ids:
;Variablen, die in allen RPS-Konfigurationen vorkommen, erhalten die SysID 1 (FXE_SINGLESTAGE)
;Variablen, die für spezielle oder optionale RPS-Konfigurationen hinzukommen, z. B. für Doppelstufen-Röhren, erhalten die
;unten angegebene SysID. (Variablen, die nur für Doppelstufenröhren verwendet werden, z. B. die SysID 2)
;Wenn Variablen zwei oder mehreren speziellen RPS-Konfigurationen zugeordnet werden müssen, die sich gegenseitig ausschliessen,
;z. B. Para-Variablen für FOX und TIGER, müssen bei den Variablen die SysID-Einträge bitweise geoderte Werte sein. Die Variablen der Para-Module
;haben als ID z. B. 24 (0x10 | 0x20)
;FXE_SINGLESTAGE   0x00000001L // Xray-Bit
;FXE_DOUBLESTAGE   0x00000002L // Xray-Bit
;FXE_SCANNING      0x00000004L // Xray-Bit
;SYSTEM_FOX        0x00000008L // Xray-Bit
;SYSTEM_TIGER      0x00000010L // Xray-Bit
;SHUTTEROPTION     0x00000020L // Xray-Bit
;TARGETREGOPTION   0x00000040L // Xray-Bit
;SECONDCENTERING   0x00000080L // Xray-Bit
;FFCOMDRIVER       0x00000100L // Xray-Bit
;AUTOCOND_ENABLED  0x00004000L // Xray-Bit
;MOT_IRIS          0x00000400L // Xray-Bit und Mani-Bit
;FME               0x00000200L // Mani-Bit
;SYSTEM_14         0x00000800L // Mani-Bit CougarFA oder System16
;SYSTEM_15         0x00001000L // Mani-Bit CougarSMT
;SYSTEM_COUGAR_XL  0x00002000L // Mani-Bit Cheetah
;JOYCTRLOPTION     0x00100000L // Mani-Bit
;------------------------------------------------------------------------------

[VarPLCVarHAL_PLCVars]
PLCVarID_0=2274
PLCVarString_0=LaserCrossHair
PLCVarID_1=2374
PLCVarString_1=WarnLamp1Ok
PLCVarID_2=2375
PLCVarString_2=WarnLamp2Ok
PLCVarID_3=2376
PLCVarString_3=WarnLamp3Ok
PLCVarID_4=2377
PLCVarString_4=WarnLampDefect

[XrayHAL]
ReadFromProcessImage=1
MaxAccVoltageTolerance=1.0
MaxTubeCurrentTolerance=3.0
MaxTargetCurrentTolerance=2.0
EnableXrayOnAfterFlashover=0

[ManiHAL]
; Für die Eigenschaft "Ready" der Schnittstelle IFFAxis wird hier standardmässig
;    AxisEnabled     && AxisInitialized && !AxisIsNotToControl 
; && AxisDriveReady  && !AxisDriveError && !AxisError
; verwendet, es wird also NICHT abgefragt, ob die Achse verriegelt ist (AxisModulePresent)
;Default für AxisReadyBitMask:  BitMaskAxisEnabled | BitMaskAxisInitialized | BitMaskAxisDriveReady
;AxisReadyBitMask=
;Default für AxisNotReadyBitMask:  BitMaskAxisIsNotToControl | BitMaskAxisDriveError | BitMaskAxisError
;AxisNotReadyBitMask=
ReadFromProcessImage=1
; ErrorIfTryingToDriveLockedAxis: 0: Kein Fehler, 1: Fehlermeldung wenn verriegelte Achse versucht wird zu fahren
ErrorIfTryingToDriveLockedAxis=0
; LoadPosTolerance war vorher in config.prm einstellbar, es wurde aber wahrscheinlich immer Defaultwert 1 verwendet!
LoadPosTolerance=1

[ManiSysIDs]
NumSysIDs=3
SysID_0=8
SysID_1=16
SysID_2=4096

; FOX
[Detector_8]
TransZ=5

[Tube_8]
TransZ=

[Stage_8]
TransX=0
TransY=1
TransZ=2
RotX=4
RotY=3

; TIGER
[Detector_16]
; Detektor-Kippachse des TIGER kann eigentlich RotX oder RotY sein!
RotX=3
RotZ=4

[Tube_16]
TransZ=2

[Stage_16]
TransX=0
TransY=1

;Cougar(SMT)
[Detector_4096]
TransZ=3
RotY=4

[Tube_4096]
TransZ=2

[Stage_4096]
TransX=0
TransY=1
RotX=5
RotZ=5

[PLCVersionIniFolderNames_CPU0]
V380=V380-389

[PLCVersionIniFolderNames_CPU1]
V430=V420-429

[PLCVERSIONVARIABLE_0]
DisplayName=SoftwareVersionCPU0
Descr=SYS_DM.SoftwareVersion
SysID=769
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=0

[PLCVERSIONVARIABLE_1]
DisplayName=SoftwareVersionCPU1
Descr=sys_dm.SoftwareVersion
SysID=1
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=0

[General]
PLCInitTimeout=120000
; Nur FXEControl
FXEControlInitTimeout=30000
; Nur FXEControl
ShowFXEControlWithoutHWLink=0
UseAFByImg=0
LoadDetectorDlls=0
UseScanVariables=0
UseDbgVariables=1
UseFXETestVariables=1
UseALUVariables=0
FirstSupportedVersion=380
LastSupportedVersion=430
; Nur FXEControl: Bezeichnet %-Wert des erreichten Tube-/Targetcurrent vom vorgegebenen (Timer)
TimerCurrentInterruptionThresh=50
; Nur FXEControl: Bezeichnet %-Wert der erreichten acc. Voltage vom vorgegebenen Wert (Timer)
TimerVoltageInterruptionThresh=70
; Nur FXEControl: Bezeichnet Dauer der zusätzlichen Delaytime in ms zum Start des Timers nach erreichen der anderen Schwellwerte (Timer)
TimerAdditionalDelay=0
; automatisches Einschalten der Strahlung nach Ueberschlag (de)aktivieren
UseAutoXRayOnAfterFlash=0
; Datenmodule verbinden? ACHTUNG: Betrifft NICHT Para- und PCPara-Dms für TIGER und FOX! Diese
; müssen immer verbunden werden, wenn entspr. System vorliegt, sonst funktionieren nicht
; alle Achsen-Funktionen
ConnectDMs=1
; Variable zur Ueberwachung der RPS (hier: 2014, kVIst)
; Abschalten der Benachrichtigung bei RPS disconnected wenn RPSCheckVariableID <= 0
RPSCheckVariableID=2014
; Intervallzeit zur Ueberwachung der RPS in ms
RPSCheckIntervall=10000
Demoversion=0
; Kundenversion: 0, Serviceversion: 1, Betriebsversion: 2, Testversion: 3 (Umschalter ASCII-PVI)
AccessVersion=1
; Apertures wird für die Amp[1] bis Amp[3] Istwerte (Blendenströme) verwendet
Apertures=1
TestFlashOver=0
DebugMessages=0
FilIncrement=0.02
UseDataTypeVerification=1
; Timeout nach Kaltstart in ms
ColdStartWaitTime=120000
; 0: no logging 1/2: log errors 3: log errors + show MessageBoxes
LogLevel=2
; relativer Pfad zum User Manual
UserManualPath=C:\Program Files (x86)\Feinfocus\FXEControl_3.1.1.65\doc\Y.FXE-Control 3.1_v01r00_en_20102586.pdf

[PLCCommunication]
ModuleEventMask="EV="
TaskEventMask="EV="
; 09.11.2004: Gibt an, ob eine Slave-RPS-CPU vorliegen kann (z.Z. nur fuer Nano-FOX)
SlaveCPU=0
; 09.11.2004: Anzahl RPS-CPUs, maximale Anzahl CPUs ist 2
CPUCount=1
; 05.08.2014: Es können jetzt die IP und Base der CPUs direkt konfiguriert werden.
; Zudem ist es möglich zwei Röhren anzusteuern.
; Gibt an, ob die Konfigurationen für HostAdress und HostBase aus der ini verwendet werden sollen,
; oder die hart codierten aus der BRDriverDefs.
UsePLCHostConfig=0
; Wenn MultipleXrayDevices aktiv ist, dann muss CPUCount auf 1 stehen. Beim Start der FXEControl
; wird ein Abfragedialog geöffnet, welche Röhre angezeigt werden soll
MultipleXrayDevices=0
; Cpu0 muss immer die Adresse einer Röhre sein.
; Die HostAdress entspricht der letzten Stelle der IP-Adresse der Röhre.
Cpu0HostAdress=10
; Parameter für den Codierschalter an der PLC. Sollte in der Regel mit der HostAdress gleich sein,
; kann aber auch unterschiedlich konfiguriert werden
Cpu0HostBase=10
; Beschreibung für den Auswahldialog beim Start der FXEControl
Cpu0Description=FXT 225.48 - CPU0 192.168.12.10
; Cpu1 kann die Adresse einer Röhre oder eines Manipulators sein. Wenn nur UsePLCHostConfig und
; CPUCount=2 ausgewählt ist, dann muss es ein Manipulator sein.
; Die HostAdress entspricht der letzten Stelle der IP adresse der Röhre.
Cpu1HostAdress=11
; Parameter für den Codierschalter an der PLC. Sollte in der Regel mit der HostAdress gleich sein,
; kann aber auch unterschiedlich konfiguriert werden.
Cpu1HostBase=11
; Beschreibung für den Auswahldialog, der beim Start der FXEControl zur Auswahl der Röhre angezeigt wird.
Cpu1Description=FXT 190.61 - CPU1 192.168.12.11

[FFCom]
;FFCOMDRIVER   256
;ONLY_FFCOMDRIVER  257
FFComSysID=0
;FFComSysID=256
InBufLength=256
OutBufLength=256
IDBufLength=4
FloatPrecision=4
WaitTimeout=500
;WaitTimeout=4000
; Timeouts nicht mehr direkt parametrisierbar, da abh. von RPS-Zykluszeit!
; Dafür kann jetzt hier die verwendete RPS-Zykluszeit angegeben werden!
PLCCycleTime=100
SwitchFMEToFFComID=3501
; Thread-Prioritäten: 0: normal, 1: above normal, 2: highest, 15: "real time"
;                    -1: below normal, -2: lowest, -15: idle
ReadThreadPriority=2
RequestThreadPriority=1
AutoUpdThreadPriority=1
LogComm=0
LogRead=0
LogWrite=0
LogAutoUpd=0
;RTS_CONTROL_DISABLE    0
;RTS_CONTROL_ENABLE     1
;RTS_CONTROL_HANDSHAKE  2
;RTS_CONTROL_TOGGLE     3
RTSMode=0
UseCTSHandshake=0

[XRayConstants]
BitMaskBattery=2
BitMaskWarmupDone=4
BitMaskFilAdjDone=8
BitMaskAutocentReady=16
BitMaskAutocentBeamSearch=32
BitMaskAutocentBeamFound=64
BitMaskStartupDone=512
BitMaskAutofuncRuns=1024
BitMaskInterlockOn=2048
BitMaskHSGOk=4096
BitMaskVacuumOk=8192
BitMaskAutocentRuns=16384
BitMaskFilAdjRuns=32768
BitMaskWarmupRuns=65536
BitMaskStartupRuns=131072
BitMaskXRayOn=262144
BitMaskReadyForXRayOn=524288
BitMaskXRayError=1048576

[ManiConstants]
AxesEnableBackside=1
; Wenn RPS V.2.0 fuer FOX verwendet wird, PositionTolerance=0 setzen, ansonsten 5-10
; theoretisch kann PositionTolerance fuer FOX auch bei alter RPS 0 gesetzt werden, das einzige
; Problem ist BASIC-Acknowledge der FGUI, da PVI u.U. die Änderungen der Ist-Pos. nicht mitbekommt
PositionTolerance=1
; Wenn RPS V.2.0 fuer FOX verwendet wird, UseManInPosForFOXBasicAckn=1 setzen, ansonsten 0
; beim Cougar15 und TIGER mit RPS >= 2.6 gibt es die ManiInPos-Variable wieder nicht mehr,
; daher dort auch Positionsvergleich machen!
UseManInPosForFOXBasicAckn=0
BitMaskAxisError=1
BitMaskAxisEnabled=2
BitMaskAxisInitialized=4
BitMaskAxisReferenced=8
BitMaskAxisRefMoving=16
BitMaskAxisMoving=32
BitMaskAxisDriveReady=64
BitMaskAxisDriveError=128
BitMaskAxisPosHWEnd=256
BitMaskAxisRefHWEnd=512
BitMaskAxisNegHWEnd=1024
BitMaskAxisTriggerInput=2048
BitMaskAxisModulePresent=4096
BitMaskAxisInPosition=8192
BitMaskAxisIsNotToControl=16384
BitMaskAxisIsVirtual=32768
; Bitmasken für Manipulator-Statuswort:
; 12.09.2005: Es ist z.Z. völlig unklar, was wie ab welcher RPS-Version
; definiert ist! Was sind die Unterschiede zwischen TIGER mit RPS-Version 2.6
; und Cougar15 mit Version 2.6, der eigentlich Version 2.7 haben sollte?
BitMaskManiError=1
BitMaskManiInitialized=4
BitMaskManiReferenced=8
BitMaskManiRefMoving=16
BitMaskManiMoving=32
BitMaskManiSingleAxisActive=64
BitMaskManiAllAxesActive=128
BitMaskManiNonPLCDriveDisabled=256
BitMaskManiInLoadPos=512
BitMaskManiLoadPosMoving=33554432
BitMaskManiInPosition=8192
BitMaskManiCPSStop=32768

[MESSLOG]
EnableAllConnectionsForTest=0
MessLogTableFileIdx=52
MinIntervallTime=100
MinChangeIntervall=200

[CONDITIONING]
; Anz. Messpunkte für Überschläge; Messintervall [min] ergibt sich aus ConditTime / ConditTableSize
ConditTableSize=72
;Einheit: min. Wenn die Zeit zwischen 2 Überschlägen > diesen Wert ist, wird die Kond. von der RPS beendet
ConditIntervall=360
;Einheit: min. Nach max. dieser Zeit wird die Konditionierung beendet
ConditTimeout=3600
; Max. Anz. Ueberschlaege, bevor Konditionierung (vom PC durch X-Ray off) abgebrochen wird
MaxConditBreaks=250
;Wartezeit nach Ueberschlag, nach der das Vakuum registriert wird [s]
WaitAfterBreakTime=5

[WOBBELING]
;Default-Werte fuers wobbeln
Step=10.0
Hub=30.0

[POSITIONINGTABLE]
; fuer Cougar15:
Description=g_tManiCtrlStartOld.tAxis
ConnectParams="EV= VT=struct VL=0 AL=4"
SysID=4376

;LINK_ALL_START_POSITION( _T( "EV=ed VT=struct {. VT=u8 } {. VT=struct VN=11 } {.. VT=f32 } {.. VT=i32 } {.. VT=u8 }" )),
;LINK_ALL_START_SPEED( _T( "EV=ed VT=struct {. VT=u8 } {. VT=struct VN=11 } {.. VT=f32 } {..  VT=i16 } {.. VT=u8 }" ));

[MOVEAXESSTRUCT]
; fuer Cougar15:
Description=g_tManiCtrlStartOld
;Das Verhalten von PVI ist hier etwas seltsam: Wird die Typinfo der Achsenstruktur ausgelesen, bekommt man immer die VL=112
;und ein Alignment von 2, auch wenn im Connect-String 4 angegeben wird und auch die Strukturen mit #pragma pack( push, 4)
;definiert werden (eigentlich kommt dann als Variablenlänge 136 raus). Es funktioniert auch alles fehlerfrei, wenn VL=0 angegeben wird!
ConnectParams="EV= VT=struct VL=0 AL=4"
;ConnectParams="EV= VT=struct VL=112 AL=4"
;geändert 03.02.2004: Fahrbefehl jetzt synchron senden!
WriteSyncDef=1
SysID=4376

[MANUALMOVEAXESSTRUCT]
; fuer Cougar15:
Description=g_tManiCtrlManuellOld
ConnectParams="EV= VT=struct VL=0 AL=4"
;geändert 03.02.2004: Fahrbefehl jetzt synchron senden!
WriteSyncDef=1
SysID=4368

;////////////////////////////////////////////////////////////////////////////////////////
;// erweiterte Control-Variablen
;////////////////////////////////////////////////////////////////////////////////////////
;condit wait. Nur explizit lesen (?!)
[CONTROLVALUE_253]
Descr=tCONwait
DataType=3
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=-1
DisplayName=MaxTimeBetweenBreakdowns[ms]
WriteSyncDef=0
ReadSyncDef=0

;Max. Spg. f. Konditionierung. Nur explizit lesen !
[CONTROLVALUE_254]
Descr=ConditioningData.condCycle[1].kVmax
DataType=4
ValueType=3
SysID=1
Active=0
Notify=0
Hysterese=1.0
RefreshTime=1000
DisplayName=ConditVoltageMax[kV]
ReadSyncDef=0

;Max. Strom f. Konditionierung. Nur explizit lesen !
[CONTROLVALUE_255]
Descr=ConditioningData.condCycle[1].current_uA
DataType=4
ValueType=3
SysID=1
Active=0
Notify=0
Hysterese=1.0
RefreshTime=1000
DisplayName=ConditCurrentMax[µA]
ReadSyncDef=0

[CONTROLVALUE_256]
Descr=HSG.FILwork
DataType=4
ValueType=1
;wird nur noch für alten Tiger (RPS < 2.6) benötigt !
SysID=0
Active=1
Notify=1
Hysterese=0.1
RefreshTime=1200
DisplayName=FilWorkCurrent[A]

[CONTROLVALUE_257]
Descr=I_fil
DataType=4
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0.1
RefreshTime=1200
DisplayName=FilWorkArray[A]
DataLen=10

; Auswahl fuer zu aktualisierendes amp-DM
[CONTROLVALUE_258]
Descr=amp_modul
DataType=10
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
DisplayName=AmpDMRefreshSel

; Auswahl fuer zu aktualisierendes cent-DM
[CONTROLVALUE_259]
Descr=PC_stat.u16_CENT_DM_nr
DataType=10
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
DisplayName=CentDMRefreshSel

[CONTROLVALUE_260]
Descr=Sys.Watchdog_enable
DataType=10
ValueType=1
SysID=513
Active=0
Notify=0
Hysterese=0
RefreshTime=250
DisplayName=WatchdogEnable[short]
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_261]
Descr=PLC_stat.bo_Watchdog
DataType=6
ValueType=1
SysID=513
;24.06.2003: Watchdog ausgeschaltet wegen Fehler auf RPS! Hoher Laufzeitverbrauch dadurch,
; dass Signal von RPS immer sofort wieder auf 1 zurückgesetzt wurde, nachdem in FXDrivers
; 0 geschickt wurde!
; 13.07.06: Wieder aktiviert, obwohl auf RPS immer noch nicht verbessert
Active=1
Notify=1
Hysterese=0
RefreshTime=2000
DisplayName=WatchdogSignal[bool]
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_262]
Descr=SYS_DM.seriennum
SysID=1
DataType=9
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
DataLen=16
DisplayName=SerialNumber
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_263]
Descr=SystemSettings.u32_workingminute_system
DataType=3
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=SystemCounter

[CONTROLVALUE_264]
Descr=SystemSettings.u32_workingminute_tube
DataType=3
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=TubeCounter

[CONTROLVALUE_265]
Descr=SystemSettings.u32_workingminute_filament
DataType=3
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=FilamentCounter

[CONTROLVALUE_266]
Descr=Condensor.Pmicro
DataType=4
ValueType=0
SysID=2
Active=1
Notify=1
Hysterese=0.5
RefreshTime=700
DisplayName=ConsModeMicroThrPow[W]
ReadSyncDef=0

[CONTROLVALUE_267]
Descr=Condensor.Pnano
DataType=4
ValueType=0
SysID=2
Active=1
Notify=1
Hysterese=0.5
RefreshTime=700
DisplayName=ConsModeNanoThrPow[W]
ReadSyncDef=0

[CONTROLVALUE_268]
Descr=PLC_cmd.reload_MODE_DM
DataType=6
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=ModeChanged[bool]
WriteSyncDef=1
ReadSyncDef=0

[CONTROLVALUE_269]
Descr=PLC_cmd.reload_TARGET_DM
DataType=6
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=TargetChanged[bool]
WriteSyncDef=1
ReadSyncDef=0

[CONTROLVALUE_270]
DisplayName=SoftwareVersion
Descr=SYS_DM.SoftwareVersion
SysID=769
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=1

[CONTROLVALUE_271]
DisplayName=CoilOff
Descr=Sys.coil_off
SysID=1
DataType=10
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=250

[CONTROLVALUE_272]
DisplayName=FilAdjBaseCurrentNew
Descr=PLC_stat.r32_newFilamentCurrentBase
SysID=1
DataType=4
ValueType=1
Active=1
Notify=1
Hysterese=0.05
RefreshTime=800

[CONTROLVALUE_273]
DisplayName=FilAdjBaseCurrentDiff
Descr=PLC_stat.r32_diffToFilamentCurrentBase
SysID=1
DataType=4
ValueType=1
Active=1
Notify=1
Hysterese=0.05
RefreshTime=800

[CONTROLVALUE_274]
DisplayName=PositioningLaser
Descr=Do_Laser
;Änd. 14.09.2004: Fuer TIGER, FOX, 15er und 16er! NICHT generell auf FXE!
SysID=6168
DataType=6
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1200
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_275]
Descr=zoom
SysID=1
DataType=10
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=500
DisplayName=BVZoomLevel
WriteSyncDef=0
ReadSyncDef=0

; 07.07.03: Reload-Variablen jetzt Control-Values, vorher ControlCommands
; Hintergrund: 1-0 Übergänge dieser Variablen können als Signal dafür
; genommen werden, dass die neuen Werte tatsächlich in die RPS-Variablenstrukturen
; eingetragen wurden!
[CONTROLVALUE_280]
Descr=PC_cmd.TUBE_DM.read
SysID=513
DisplayName=ReloadTubeDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_281]
Descr=PC_cmd.AMP_DM.read
SysID=1
DisplayName=ReloadAmpDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_282]
Descr=PC_cmd.HSG_DM.read
SysID=513
DisplayName=ReloadHSGDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_283]
Descr=PC_cmd.VAC_DM.read
SysID=1
DisplayName=ReloadVacuumDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_284]
Descr=PC_cmd.COND_DM.read
SysID=1
DisplayName=ReloadConditDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_285]
Descr=PC_cmd.SYS_DM.read
SysID=513
DisplayName=ReloadSystemDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_286]
Descr=PC_cmd.FOCUS_DM.read
SysID=1
DisplayName=ReloadFocusDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_287]
Descr=PC_cmd.CONS_DM.read
SysID=2
DisplayName=ReloadCondensorDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_288]
Descr=cmd_read_shutter
SysID=32
DisplayName=ReloadShutterDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_289]
Descr=PC_cmd.CENT_DM.read
SysID=1
DisplayName=ReloadCenteringDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_290]
Descr=cmd_read_scan
SysID=4
DisplayName=ReloadScanDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_291]
Descr=PC_cmd.TIREG_DM.read
SysID=1
DisplayName=ReloadTiRegDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_292]
Descr=cmd_read_comconf
DisplayName=ReloadComConfDM
;22.11.2004: zunächst ausgeschaltet, bei nächster Version, wenn alle Systeme COMCONF-DM beinhalten, einbauen
SysID=0
;SysID=513
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_293]
Descr=PC_cmd.INIT_DM
SysID=1
DisplayName=ReloadInitDM
DataType=9
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DataLen=10

[CONTROLVALUE_294]
DisplayName=ReloadAllDMs
Descr=PC_cmd.ALL_DM.read
SysID=1
DataType=14
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_295]
DisplayName=UsageAmp1
Descr=Amp[1].Verwendung
SysID=1
DataType=9
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
DataLen=16

[CONTROLVALUE_296]
DisplayName=UsageAmp2
Descr=Amp[2].Verwendung
SysID=34
DataType=9
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
DataLen=16

[CONTROLVALUE_297]
DisplayName=UsageAmp3
Descr=Amp[3].Verwendung
SysID=34
DataType=9
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
DataLen=16

[CONTROLVALUE_298]
DisplayName=DiTubeheadEnable
Descr=Di_tubehead_enable
SysID=1
DataType=6
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=0

[CONTROLVALUE_299]
Descr=target.current_target_number
DataType=11
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=Target
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_300]
Descr=target.last_target_number
DataType=11
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=TargetCount
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_301]
DisplayName=TubeheadNumber
Descr=Tubehead.current_tubehead_number
SysID=1
DataType=11
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1250

[CONTROLVALUE_302]
DisplayName=TubeheadCount
Descr=Tubehead.last_tubehead_number
SysID=1
DataType=11
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_303]
Descr=PLC_cmd.reload_TARGET_DM
DataType=6
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=TubeheadChanged[bool]
WriteSyncDef=1
ReadSyncDef=0

[CONTROLVALUE_304]
Descr=iIrisMoveDir
DataType=0
ValueType=1
SysID=1024
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=IrisMoveDir

[CONTROLVALUE_305]
Descr=iIrisSetPos
DataType=0
ValueType=1
SysID=1024
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=IrisSetPos

[CONTROLVALUE_306]
Descr=iIrisCurPos
DataType=0
ValueType=0
SysID=1024
Active=1
Notify=1
Hysterese=0
RefreshTime=250
DisplayName=IrisCurPos

[CONTROLVALUE_307]
Descr=iIrisCurPosActual
DataType=10
ValueType=0
SysID=1024
Active=1
Notify=1
Hysterese=0
RefreshTime=250
DisplayName=IrisCurPosActual

[CONTROLVALUE_308]
Descr=Vacon
DataType=6
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=VacuumOn[bool]

[CONTROLVALUE_309]
Descr=EnableShutterOnIfManiMoves
DataType=6
ValueType=1
SysID=32
Active=1
Notify=1
Hysterese=0
RefreshTime=1000
DisplayName=EnableShutterOnIfManiMoves[bool]

[CONTROLVALUE_310]
DisplayName=SoftwareVersionMani
Descr=sys_dm.SoftwareVersion
SysID=4120
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=1

[CONTROLVALUE_311]
DisplayName=DetectorXRange
Descr=DetectorXRangeNotDefinedYet
SysID=0
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=1

[CONTROLVALUE_312]
DisplayName=DetectorYRange
Descr=DetectorXRangeNotDefinedYet
SysID=0
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=1

[CONTROLVALUE_313]
DisplayName=AxisCountReal
Descr=g_tManiParameters.uMaxAxesReal
SysID=4096
DataType=11
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1250
ReadSyncDef=0

[CONTROLVALUE_314]
DisplayName=FocusDetectorDist0
Descr=FocusDetectorDist0NotDefinedYet
SysID=0
DataType=3
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=500
ReadSyncDef=0

[CONTROLVALUE_315]
Descr=PC_cmd.FIL_DM.read
SysID=1
DisplayName=ReloadFilDM
DataType=6
ValueType=1
Active=1
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_316]
DisplayName=TrayOffset
Descr=g_fTrayOffset
TaskName=manimove
DataType=4
ValueType=1
SysID=4112
Active=1
Notify=1
RefreshTime=10000
Hysterese=0.1

[CONTROLVALUE_317]
DisplayName=Magnification
Descr=g_fMagnification
TaskName=manimove
DataType=4
ValueType=0
SysID=4112
Active=1
Notify=1
RefreshTime=250
Hysterese=0.1

[CONTROLVALUE_318]
DisplayName=DoorVersion
Descr=g_tDoor.dwDoorVersion
DataType=2
ValueType=1
SysID=4112
Active=1
Notify=0
RefreshTime=2500
Hysterese=0

[CONTROLVALUE_319]
DisplayName=FNCProgramRunning
Descr=g_bFNC_Drive
DataType=6
ValueType=1
SysID=4112
; 20.05.08: Active, Notify=1 (für Mani-HAL)
Active=1
Notify=1
RefreshTime=2500
Hysterese=0

[CONTROLVALUE_320]
DisplayName=EnableAIM
Descr=g_bPC_AIM_Enable
DataType=6
ValueType=1
;27.01.06: Auch fuer TIGER, da Aim dort jetzt auch auf RPS
SysID=4112
; 20.05.08: Active, Notify=1 (für Mani-HAL)
Active=1
Notify=1
RefreshTime=2500
Hysterese=0

[CONTROLVALUE_321]
DisplayName=TeachNewPOI
Descr=l_bXYJoystickDriveOff
TaskName=joyctrl
DataType=6
ValueType=0
SysID=16
Active=1
Notify=1
RefreshTime=150
Hysterese=0

[CONTROLVALUE_322]
DisplayName=CamAxisAttachedToRotAxis
Descr=g_tCameraAxis.dwEnable
TaskName=
DataType=3
ValueType=1
SysID=16
Active=1
Notify=1
RefreshTime=250
Hysterese=0

[CONTROLVALUE_333]
Descr=l_ptDpr.bSampleHolder
DataType=6
ValueType=0
SysID=4096
Active=1
Notify=1
Hysterese=0
RefreshTime=200
DisplayName=SampleHolderPresent[bool]
WriteSyncDef=1
ReadSyncDef=0
TaskName=pp_mast

[CONTROLVALUE_334]
Descr=l_ptDpr.bTurnTable
DataType=6
ValueType=0
SysID=4096
Active=1
Notify=1
Hysterese=0
RefreshTime=200
DisplayName=TurnTablePresent[bool]
WriteSyncDef=1
ReadSyncDef=0
TaskName=pp_mast

[CONTROLVALUE_335]
Descr=g_tAIM_Mask.settings
SysID=4120
DisplayName=AIMSettings
DataType=3
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_336]
Descr=l_bCollProt_Activ
SysID=4096
DisplayName=CPS_Active
DataType=6
ValueType=0
Active=1
Notify=1
RefreshTime=500
TaskName=manimove
Hysterese=0

[CONTROLVALUE_337]
Descr=g_bCollProtExists
SysID=4120
DisplayName=CPS_Exists
DataType=6
ValueType=0
Active=1
Notify=1
RefreshTime=-1
Hysterese=0

[CONTROLVALUE_338]
Descr=g_bPC_CollProt_Enable
SysID=4120
DisplayName=CPS_Enabled
DataType=6
ValueType=1
Active=1
Notify=1
; 13.05.08: RefreshTime wegen Mani-HAL geändert von -1 auf 1000
RefreshTime=1000
Hysterese=0

[CONTROLVALUE_339]
Descr=g_bPC_PLCinitialized
SysID=4120
DisplayName=PLC_Initialized
DataType=6
ValueType=0
Active=0
Notify=0
RefreshTime=-1
Hysterese=0

[CONTROLVALUE_340]
Descr=l_ptDpr.atAxisValues[0].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis1
TaskName=pp_mast

[CONTROLVALUE_341]
Descr=l_ptDpr.atAxisValues[1].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis2
TaskName=pp_mast

[CONTROLVALUE_342]
Descr=l_ptDpr.atAxisValues[2].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis3
TaskName=pp_mast

[CONTROLVALUE_343]
Descr=l_ptDpr.atAxisValues[3].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis4
TaskName=pp_mast

[CONTROLVALUE_344]
Descr=l_ptDpr.atAxisValues[4].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis5
TaskName=pp_mast

[CONTROLVALUE_345]
Descr=l_ptDpr.atAxisValues[5].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=pp_mast
SysID=4112
DisplayName=ConfigAxis6

[CONTROLVALUE_346]
Descr=l_ptDpr.atAxisValues[6].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis7
TaskName=pp_mast

[CONTROLVALUE_347]
Descr=l_ptDpr.atAxisValues[7].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis8
TaskName=pp_mast

[CONTROLVALUE_348]
Descr=l_ptDpr.atAxisValues[8].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis9
TaskName=pp_mast

[CONTROLVALUE_349]
Descr=l_ptDpr.atAxisValues[9].tAxisParameter.dwAxisConfig
DataType=3
ValueType=0
SysID=4112
Active=1
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=ConfigAxis10
TaskName=pp_mast

[CONTROLVALUE_350]
Descr=g_tRelJoy.dwDirSwitch
DisplayName=JoystickXYInverse
DataType=3
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_351]
Descr=g_tRelJoy.dwEnable
DisplayName=XYJoyDependOnRotEnable
DataType=3
ValueType=1
SysID=16
Active=0
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_352]
Descr=g_bServiceMode
DisplayName=ManiServiceMode
DataType=6
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_356]
DisplayName=ACT_AxisPresent
Descr=l_ptDpr.bACTHolder
SysID=4096
DataType=6
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=250
TaskName=pp_mast

[CONTROLVALUE_358]
Descr=g_abEndlessRotDisabled
DataType=6
ValueType=1
SysID=4096
Active=0
Notify=0
Hysterese=0
RefreshTime=1500
;10 Achsen
DataLen=10
DisplayName=EndlessRotDisabledArray[bool]

;////////////////////////////////////////////////////////////////////////////////////////
;// Ampel-Variablen
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_359]
DisplayName=Wlamp1DemandState[0]
Descr=l_tLampCmdInterface[0].cDemandState
DataType=14
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_360]
DisplayName=Wlamp1FlashPeriod[0]
Descr=l_tLampCmdInterface[0].wFlashPeriod
DataType=11
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_361]
DisplayName=Wlamp1Set[0]
Descr=l_tLampCmdInterface[0].bSetLamp
DataType=6
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_362]
DisplayName=Wlamp1DemandState[1]
Descr=l_tLampCmdInterface[1].cDemandState
DataType=14
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_363]
DisplayName=Wlamp1FlashPeriod[1]
Descr=l_tLampCmdInterface[1].wFlashPeriod
DataType=11
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_364]
DisplayName=Wlamp1Set[1]
Descr=l_tLampCmdInterface[1].bSetLamp
DataType=6
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_365]
DisplayName=Wlamp1DemandState[2]
Descr=l_tLampCmdInterface[2].cDemandState
DataType=14
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_366]
DisplayName=Wlamp1FlashPeriod[2]
Descr=l_tLampCmdInterface[2].wFlashPeriod
DataType=11
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_367]
DisplayName=Wlamp1Set[2]
Descr=l_tLampCmdInterface[2].bSetLamp
DataType=6
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_368]
DisplayName=Wlamp1DemandState[3]
Descr=l_tLampCmdInterface[3].cDemandState
DataType=14
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_369]
DisplayName=Wlamp1FlashPeriod[3]
Descr=l_tLampCmdInterface[3].wFlashPeriod
DataType=11
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_370]
DisplayName=Wlamp1Set[3]
Descr=l_tLampCmdInterface[3].bSetLamp
DataType=6
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_371]
DisplayName=Wlamp1DemandState[4]
Descr=l_tLampCmdInterface[4].cDemandState
DataType=14
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_372]
DisplayName=Wlamp1FlashPeriod[4]
Descr=l_tLampCmdInterface[4].wFlashPeriod
DataType=11
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

[CONTROLVALUE_373]
DisplayName=Wlamp1Set[4]
Descr=l_tLampCmdInterface[4].bSetLamp
DataType=6
ValueType=1
SysID=4112
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
TaskName=sigtower

;////////////////////////////////////////////////////////////////////////////////////////
;// Warnlampen-Variablen
;////////////////////////////////////////////////////////////////////////////////////////
;// Die Variablen für die einzelnen Warnlampen sind unbrauchbar,
;// immer auf 0 oder nur sehr kurzfristig 1 wenn Fehler
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_374]
DisplayName=WarnlampDefect
Descr=Lamp_def
DataType=6
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1000

[CONTROLVALUE_375]
DisplayName=ManiInterlock
Descr=l_ptDpr.bInterlock
DataType=6
ValueType=0
SysID=4120
Active=1
Notify=1
Hysterese=0
RefreshTime=100
ReadSyncDef=0
TaskName=pp_mast

[CONTROLVALUE_376]
Descr=VAC_DM.version
DataType=11
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1000
DisplayName=VacuumVersion
ReadSyncDef=0

[CONTROLVALUE_377]
Descr=Vac.mess
DataType=4
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0.2
RefreshTime=1000
DisplayName=VacuumNom[V]
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_378]
Descr=HSG.Gridist
DataType=4
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1000
DisplayName=GridVoltage[V]
ReadSyncDef=0

; nur explizit Lesen für Autocond.
[CONTROLVALUE_379]
Descr=TUBE_DM.seriennum
DataType=9
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=SerialNumber
ReadSyncDef=0
DataLen=16

[CONTROLVALUE_380]
Descr=TUBE_DM.name
DataType=9
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=1000
DisplayName=Name
ReadSyncDef=0
DataLen=16

[CONTROLVALUE_381]
Descr=Focus.f
DataType=4
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1000
DisplayName=FocusCurAct
ReadSyncDef=0

[CONTROLVALUE_382]
Descr=PC_cmd.i32_XrayTimer_set_time
DataType=3
ValueType=1
SysID=769
Active=1
Notify=1
Hysterese=0
RefreshTime=1000
DisplayName=XrayTimer_set_time
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_383]
Descr=PLC_stat.i32_XrayTimer_left_time
DataType=3
ValueType=1
SysID=769
Active=1
Notify=1
Hysterese=0
RefreshTime=1000
DisplayName=XrayTimer_left_time
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_384]
Descr=PLC_stat.u32_cond_character
DataType=0
ValueType=1
SysID=769
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=AutoCondenserStatus
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_385]
Descr=PLC_stat.u32_filamentcorradjust
DataType=0
ValueType=1
SysID=769
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=FilamentCorrectionTestStatus
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_386]
Descr=r32_calcFilCorr
DataType=4
ValueType=1
SysID=769
Active=1
Hysterese=0
RefreshTime=0
DisplayName=FilamentCorrectionTestResult
WriteSyncDef=0
ReadSyncDef=0
TaskName=filcorradj

[CONTROLVALUE_387]
Descr=PLC_stat.u32_Leckstromtest
DataType=0
ValueType=1
SysID=769
Active=1
Notify=1
Hysterese=0
RefreshTime=100
DisplayName=LeakageCurrentTestStatus
WriteSyncDef=0
ReadSyncDef=0

[CONTROLVALUE_388]
Descr=r32_mAist_Mittel
DataType=4
ValueType=1
SysID=769
Active=1
Hysterese=0
RefreshTime=0
DisplayName=LeakageCurrentTestResultMean
WriteSyncDef=0
ReadSyncDef=0
TaskName=Leckstrom

[CONTROLVALUE_389]
Descr=r32_kV_limit_no_leak
DataType=4
ValueType=1
SysID=769
Active=1
Hysterese=0
RefreshTime=0
DisplayName=LeakageCurrentTestResultLimitNoLeak
WriteSyncDef=0
ReadSyncDef=0
TaskName=Leckstrom

[CONTROLVALUE_390]
Descr=bo_leak_is_linear
DataType=6
ValueType=1
SysID=769
Active=1
Hysterese=0
RefreshTime=0
DisplayName=LeakageCurrentTestResultLeakIsLinear
WriteSyncDef=0
ReadSyncDef=0
TaskName=Leckstrom

;////////////////////////////////////////////////////////////////////////////////////////
;// NEUE VARIABLEN-PARAMETRISIERUNGEN HIER EINTRAGEN
;////////////////////////////////////////////////////////////////////////////////////////
; Variable zur Zuordnung der Variablen zu verschiedenen FXE-Typen und Systemen.
; Nicht benötigte bzw. nicht auf der RPS vorhandene Variablen werden nicht über PVI connected
; Die Identifikation ist in dem String bitcodiert
;////////////////////////////////////////////////////////////////////////////////////////
[SYSTEMID_0]
DisplayName=SysIDVariable1
Descr=Sys.SysConfig
SysID=769
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=0

[SYSTEMID_1]
DisplayName=SysIDVariable2
Descr=sys_dm.SysConfig
SysID=1
DataType=3
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250
ReadSyncDef=0

;////////////////////////////////////////////////////////////////////////////////////////
;// erweiterte Kommandos
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLCOMMAND_96]
Descr=PC_cmd.focusCharacteristic.write_default
SysID=1
DisplayName=WriteDefFocusTable
WriteSyncDef=0

[CONTROLCOMMAND_97]
Descr=PC_cmd.condensorCharacteristic.write_default
SysID=2
DisplayName=WriteDefCentTable
WriteSyncDef=0

[CONTROLCOMMAND_98]
Descr=write_def_shut
SysID=32
DisplayName=WriteDefShutterTable
WriteSyncDef=0

[CONTROLCOMMAND_99]
Descr=PC_cmd.reset_workinghour_system
SysID=1
DisplayName=DelSystemCounter

[CONTROLCOMMAND_100]
Descr=PC_cmd.reset_workinghour_tube
SysID=1
DisplayName=DelTubeCounter

[CONTROLCOMMAND_101]
Descr=PC_cmd.reset_workinghour_filament
SysID=1
DisplayName=DelFilamentCounter

; mode-Datenmodul lesen, analog wie bei Kennlinien
[CONTROLCOMMAND_102]
Descr=PC_cmd.MODE_DM.read
SysID=1
DisplayName=ReadModeModule
WriteSyncDef=0

; target-Datenmodul lesen, analog wie bei Kennlinien
[CONTROLCOMMAND_103]
Descr=PC_cmd.TARGET_DM.read
SysID=1
DisplayName=ReadTargetModule
WriteSyncDef=0

; mode-Datenmodul lesen, analog wie bei Kennlinien
[CONTROLCOMMAND_104]
Descr=PC_cmd.MODE_DM.create_new
SysID=1
DisplayName=NewModeModule
WriteSyncDef=0

; target-Datenmodul lesen, analog wie bei Kennlinien
[CONTROLCOMMAND_105]
Descr=PC_cmd.TARGET_DM.create_new
SysID=1
DisplayName=NewTargetModule
WriteSyncDef=0

[CONTROLCOMMAND_106]
Descr=PC_cmd.new_filament
SysID=1
DisplayName=NewFilament

[CONTROLCOMMAND_107]
Descr=PC_cmd.focusCharacteristic.read_default
SysID=1
DisplayName=LoadDefFocusTable
WriteSyncDef=0

[CONTROLCOMMAND_108]
Descr=PC_cmd.condensorCharacteristic.read_default
SysID=2
DisplayName=LoadDefConsTable
WriteSyncDef=0

[CONTROLCOMMAND_109]
Descr=read_def_shut
SysID=32
DisplayName=LoadDefShutterTable
WriteSyncDef=0

[CONTROLCOMMAND_111]
Descr=PC_cmd.TubeCharacteristic.read
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_112]
Descr=PC_cmd.TubeCharacteristic.write
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_113]
Descr=PC_cmd.TubeCharacteristic.store_point
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_114]
Descr=PC_cmd.TubeCharacteristic.delete_point
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_115]
Descr=PC_cmd.TubeCharacteristic.delete_all_points
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_116]
Descr=PC_cmd.TubeCharacteristic.read_default
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_117]
Descr=PC_cmd.TubeCharacteristic.write_default
SysID=512
DisplayName=DelTubeCounter

[CONTROLCOMMAND_118]
Descr=PC_cmd.TUBEHEAD_DM.read
SysID=1
DisplayName=ReadTubheadModule

[CONTROLCOMMAND_119]
Descr=l_ptDpr.tManiCommands.bStartZentPosAll
SysID=4120
DisplayName=CenterAllAxes
WriteSyncDef=0
TaskName=pp_mast

[CONTROLCOMMAND_120]
Descr=l_ptDpr.tManiCommands.bStartLoadPosAll
SysID=4120
DisplayName=LoadPosAllAxes
WriteSyncDef=0
TaskName=pp_mast

[CONTROLCOMMAND_121]
Descr=cmd_opencom
SysID=0
DisplayName=OpenFFCom
WriteSyncDef=1

[CONTROLCOMMAND_122]
Descr=cmd_closecom
SysID=0
DisplayName=CloseFFCom
WriteSyncDef=1

[CONTROLCOMMAND_124]
DisplayName=PC_cmd.xraytimerON
Descr=PC_cmd.xraytimerON
SysID=1
WriteSyncDef=0

[CONTROLCOMMAND_125]
DisplayName=PC_cmd.xraytimerOFF
Descr=PC_cmd.xraytimerOFF
SysID=1
WriteSyncDef=0

[CONTROLCOMMAND_126]
DisplayName=PC_cmd.xraytimerReset
Descr=PC_cmd.xraytimerReset
SysID=1
WriteSyncDef=0

[CONTROLCOMMAND_127]
Descr=PC_cmd.condensor_character_kV
SysID=257
DisplayName=DoAutocondenserKV
WriteSyncDef=0

[CONTROLCOMMAND_128]
Descr=PC_cmd.condensor_character_singlemod
SysID=257
DisplayName=DoAutocondenserMod
WriteSyncDef=0

[CONTROLCOMMAND_129]
Descr=PC_cmd.condensor_character_multimod
SysID=257
DisplayName=DoAutocondenserAll
WriteSyncDef=0

[CONTROLCOMMAND_130]
Descr=PC_cmd.filamentcorradjust
SysID=257
DisplayName=DoFilamentCorrectionTest
WriteSyncDef=0

[CONTROLCOMMAND_131]
Descr=PC_cmd.leckstromtest
SysID=257
DisplayName=DoLeakageCurrentTest
WriteSyncDef=0

;////////////////////////////////////////////////////////////////////////////////////////
;// Debug-Variablen
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_10000]
Descr=Filament_Q20
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=250
DisplayName=FilamentQ20

[CONTROLVALUE_10001]
Descr=Filament_Q50
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=250
DisplayName=FilamentQ50

[CONTROLVALUE_10002]
Descr=Filament_Q100
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=250
DisplayName=FilamentQ100

[CONTROLVALUE_10003]
Descr=Filament_Q250
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=250
DisplayName=FilamentQ250

[CONTROLVALUE_10004]
Descr=Filament_Q500
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=250
DisplayName=FilamentQ500

[CONTROLVALUE_10005]
Descr=Filament_Q1000
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=250
DisplayName=FilamentQ1000

[CONTROLVALUE_10006]
Descr=Target_Ws_025
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.25
RefreshTime=1000
DisplayName=TargetJ025

[CONTROLVALUE_10007]
Descr=Target_Ws_05
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TargetJ05

[CONTROLVALUE_10008]
Descr=Target_Ws_1
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TargetJ1

[CONTROLVALUE_10009]
Descr=Target_Ws_2
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TargetJ2

[CONTROLVALUE_10010]
Descr=Target_Ws_4
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TargetJ4

[CONTROLVALUE_10011]
Descr=Target_Ws_6
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TargetJ6

[CONTROLVALUE_10012]
Descr=Target_Ws_10
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TargetJ10

[CONTROLVALUE_10013]
Descr=Sys_error
DataType=11
ValueType=0
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1500
DataLen=21
DisplayName=SystemErrorArray

[CONTROLVALUE_10014]
Descr=HSG_error
DataType=11
ValueType=0
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1500
DataLen=21
DisplayName=HSGErrorArray

[CONTROLVALUE_10015]
Descr=Tube_error
DataType=11
ValueType=0
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1500
DataLen=21
DisplayName=TubeErrorArray

[CONTROLVALUE_10016]
Descr=Vac_error
DataType=11
ValueType=0
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=1500
DataLen=21
DisplayName=VacuumErrorArray

[CONTROLVALUE_10017]
Descr=Sys_err_count
DataType=11
ValueType=0
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=4000
DisplayName=SysErrorArrayIdx

[CONTROLVALUE_10018]
Descr=HSG_err_count
DataType=11
ValueType=0
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=4000
DisplayName=HSGErrorArrayIdx

[CONTROLVALUE_10019]
Descr=Tube_err_count
DataType=11
ValueType=0
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=4000
DisplayName=TubeErrorArrayIdx

[CONTROLVALUE_10020]
Descr=Vac_err_count
DataType=11
ValueType=0
SysID=1
Active=1
Notify=1
Hysterese=0
RefreshTime=4000
DisplayName=VacuumErrorArrayIdx

[CONTROLVALUE_10021]
DisplayName=LoadPositionEnable1
; für Cougar15:
Descr=l_ptDpr.atAxisValues[0].tAxisParameter.dwLoadPos_Enab
SysID=4120
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10022]
DisplayName=LoadPositionEnable2
; für Cougar15:
Descr=l_ptDpr.atAxisValues[1].tAxisParameter.dwLoadPos_Enab
SysID=4120
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10023]
DisplayName=LoadPositionEnable3
; für Cougar15:
Descr=l_ptDpr.atAxisValues[2].tAxisParameter.dwLoadPos_Enab
SysID=4120
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10024]
DisplayName=LoadPositionEnable4
; für Cougar15:
Descr=l_ptDpr.atAxisValues[3].tAxisParameter.dwLoadPos_Enab
SysID=4120
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10025]
DisplayName=LoadPositionEnable5
; für Cougar15:
Descr=l_ptDpr.atAxisValues[4].tAxisParameter.dwLoadPos_Enab
SysID=4120
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10026]
DisplayName=LoadPositionEnable6
; für Cougar15:
Descr=l_ptDpr.atAxisValues[5].tAxisParameter.dwLoadPos_Enab
SysID=4120
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

;////////////////////////////////////////////////////////////////////////////////////////
;// ACHSEN 7-10 VORERST NUR FUER COUGAR15!
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_10027]
DisplayName=LoadPositionEnable7
; für Cougar15:
Descr=l_ptDpr.atAxisValues[6].tAxisParameter.dwLoadPos_Enab
SysID=24
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10028]
DisplayName=LoadPositionEnable8
; für Cougar15:
Descr=l_ptDpr.atAxisValues[7].tAxisParameter.dwLoadPos_Enab
SysID=24
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10029]
DisplayName=LoadPositionEnable9
; für Cougar15:
Descr=l_ptDpr.atAxisValues[8].tAxisParameter.dwLoadPos_Enab
SysID=24
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10030]
DisplayName=LoadPositionEnable10
; für Cougar15:
Descr=l_ptDpr.atAxisValues[9].tAxisParameter.dwLoadPos_Enab
SysID=24
DataType=1
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

;////////////////////////////////////////////////////////////////////////////////////////
;// BELADEPOSITIONEN 1-6 VORERST NUR FUER TIGER!
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_10031]
DisplayName=LoadPosition1
Descr=l_ptDpr.atAxisValues[0].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10032]
DisplayName=LoadPosition2
Descr=l_ptDpr.atAxisValues[1].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10033]
DisplayName=LoadPosition3
Descr=l_ptDpr.atAxisValues[2].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10034]
DisplayName=LoadPosition4
Descr=l_ptDpr.atAxisValues[3].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10035]
DisplayName=LoadPosition5
Descr=l_ptDpr.atAxisValues[4].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10036]
DisplayName=LoadPosition6
Descr=l_ptDpr.atAxisValues[5].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10037]
DisplayName=LoadPosition7
Descr=l_ptDpr.atAxisValues[6].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10038]
DisplayName=LoadPosition8
Descr=l_ptDpr.atAxisValues[7].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10039]
DisplayName=LoadPosition9
Descr=l_ptDpr.atAxisValues[8].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

[CONTROLVALUE_10040]
DisplayName=LoadPosition10
Descr=l_ptDpr.atAxisValues[9].tAxisParameter.fLoadPos
SysID=4112
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1
TaskName=pp_mast

;////////////////////////////////////////////////////////////////////////////////////////
;// AxesWatch-Variablen
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_10041]
DisplayName=AxisEncValue[0]
Descr=DC_nEncoder[0]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10042]
DisplayName=AxisEncMastSlaveOffset[0]
Descr=l_anMasterSlaveEncoderOffset[0]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10043]
DisplayName=MasterSlaveDiff[0]
Descr=l_afMasterSlaveDiff[0]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10044]
DisplayName=MasterSlaveDiffMax[0]
Descr=l_afMasterSlaveDiffMax[0]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10045]
DisplayName=MastSlavRefMaxDiff[0]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[0]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10046]
DisplayName=MastSlavNormMaxDiff[0]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[0]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10047]
DisplayName=ScalingFactor[0]
Descr=g_tAxesWatch.afScalingFactor[0]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10048]
DisplayName=AxisEncValue[1]
Descr=DC_nEncoder[1]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10049]
DisplayName=AxisEncMastSlaveOffset[1]
Descr=l_anMasterSlaveEncoderOffset[1]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10050]
DisplayName=MasterSlaveDiff[1]
Descr=l_afMasterSlaveDiff[1]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10051]
DisplayName=MasterSlaveDiffMax[1]
Descr=l_afMasterSlaveDiffMax[1]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10052]
DisplayName=MastSlavRefMaxDiff[1]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[1]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10053]
DisplayName=MastSlavNormMaxDiff[1]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[1]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10054]
DisplayName=ScalingFactor[1]
Descr=g_tAxesWatch.afScalingFactor[1]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10055]
DisplayName=AxisEncValue[2]
Descr=DC_nEncoder[2]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10056]
DisplayName=AxisEncMastSlaveOffset[2]
Descr=l_anMasterSlaveEncoderOffset[2]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10057]
DisplayName=MasterSlaveDiff[2]
Descr=l_afMasterSlaveDiff[2]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10058]
DisplayName=MasterSlaveDiffMax[2]
Descr=l_afMasterSlaveDiffMax[2]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10059]
DisplayName=MastSlavRefMaxDiff[2]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[2]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10060]
DisplayName=MastSlavNormMaxDiff[2]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[2]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10061]
DisplayName=ScalingFactor[2]
Descr=g_tAxesWatch.afScalingFactor[2]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10062]
DisplayName=AxisEncValue[3]
Descr=DC_nEncoder[3]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10063]
DisplayName=AxisEncMastSlaveOffset[3]
Descr=l_anMasterSlaveEncoderOffset[3]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10064]
DisplayName=MasterSlaveDiff[3]
Descr=l_afMasterSlaveDiff[3]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10065]
DisplayName=MasterSlaveDiffMax[3]
Descr=l_afMasterSlaveDiffMax[3]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10066]
DisplayName=MastSlavRefMaxDiff[3]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[3]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10067]
DisplayName=MastSlavNormMaxDiff[3]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[3]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10068]
DisplayName=ScalingFactor[3]
Descr=g_tAxesWatch.afScalingFactor[3]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10069]
DisplayName=AxisEncValue[4]
Descr=DC_nEncoder[4]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10070]
DisplayName=AxisEncMastSlaveOffset[4]
Descr=l_anMasterSlaveEncoderOffset[4]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10071]
DisplayName=MasterSlaveDiff[4]
Descr=l_afMasterSlaveDiff[4]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10072]
DisplayName=MasterSlaveDiffMax[4]
Descr=l_afMasterSlaveDiffMax[4]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10073]
DisplayName=MastSlavRefMaxDiff[4]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[4]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10074]
DisplayName=MastSlavNormMaxDiff[4]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[4]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10075]
DisplayName=ScalingFactor[4]
Descr=g_tAxesWatch.afScalingFactor[4]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10076]
DisplayName=AxisEncValue[5]
Descr=DC_nEncoder[5]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10077]
DisplayName=AxisEncMastSlaveOffset[5]
Descr=l_anMasterSlaveEncoderOffset[5]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10078]
DisplayName=MasterSlaveDiff[5]
Descr=l_afMasterSlaveDiff[5]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10079]
DisplayName=MasterSlaveDiffMax[5]
Descr=l_afMasterSlaveDiffMax[5]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10080]
DisplayName=MastSlavRefMaxDiff[5]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[5]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10081]
DisplayName=MastSlavNormMaxDiff[5]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[5]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10082]
DisplayName=ScalingFactor[5]
Descr=g_tAxesWatch.afScalingFactor[5]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10083]
DisplayName=AxisEncValue[6]
Descr=DC_nEncoder[6]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10084]
DisplayName=AxisEncMastSlaveOffset[6]
Descr=l_anMasterSlaveEncoderOffset[6]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10085]
DisplayName=MasterSlaveDiff[6]
Descr=l_afMasterSlaveDiff[6]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10086]
DisplayName=MasterSlaveDiffMax[6]
Descr=l_afMasterSlaveDiffMax[6]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10087]
DisplayName=MastSlavRefMaxDiff[6]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[6]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10088]
DisplayName=MastSlavNormMaxDiff[6]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[6]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10089]
DisplayName=ScalingFactor[6]
Descr=g_tAxesWatch.afScalingFactor[6]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10090]
DisplayName=AxisEncValue[7]
Descr=DC_nEncoder[7]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10091]
DisplayName=AxisEncMastSlaveOffset[7]
Descr=l_anMasterSlaveEncoderOffset[7]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10092]
DisplayName=MasterSlaveDiff[7]
Descr=l_afMasterSlaveDiff[7]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10093]
DisplayName=MasterSlaveDiffMax[7]
Descr=l_afMasterSlaveDiffMax[7]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10094]
DisplayName=MastSlavRefMaxDiff[7]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[7]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10095]
DisplayName=MastSlavNormMaxDiff[7]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[7]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10096]
DisplayName=ScalingFactor[7]
Descr=g_tAxesWatch.afScalingFactor[7]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10097]
DisplayName=AxisEncValue[8]
Descr=DC_nEncoder[8]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10098]
DisplayName=AxisEncMastSlaveOffset[8]
Descr=l_anMasterSlaveEncoderOffset[8]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10099]
DisplayName=MasterSlaveDiff[8]
Descr=l_afMasterSlaveDiff[8]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10100]
DisplayName=MasterSlaveDiffMax[8]
Descr=l_afMasterSlaveDiffMax[8]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10101]
DisplayName=MastSlavRefMaxDiff[8]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[8]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10102]
DisplayName=MastSlavNormMaxDiff[8]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[8]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10103]
DisplayName=ScalingFactor[8]
Descr=g_tAxesWatch.afScalingFactor[8]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10104]
DisplayName=AxisEncValue[9]
Descr=DC_nEncoder[9]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10105]
DisplayName=AxisEncMastSlaveOffset[9]
Descr=l_anMasterSlaveEncoderOffset[9]
SysID=4120
DataType=10
ValueType=0
Active=1
Notify=1
Hysterese=0
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10106]
DisplayName=MasterSlaveDiff[9]
Descr=l_afMasterSlaveDiff[9]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10107]
DisplayName=MasterSlaveDiffMax[9]
Descr=l_afMasterSlaveDiffMax[9]
SysID=4120
DataType=4
ValueType=0
Active=1
Notify=1
Hysterese=0.5
RefreshTime=500
TaskName=axeswtch

[CONTROLVALUE_10108]
DisplayName=MastSlavRefMaxDiff[9]
Descr=g_tAxesWatch.afMastSlavRefMaxDiff[9]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10109]
DisplayName=MastSlavNormMaxDiff[9]
Descr=g_tAxesWatch.afMastSlavNormMaxDiff[9]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

[CONTROLVALUE_10110]
DisplayName=ScalingFactor[9]
Descr=g_tAxesWatch.afScalingFactor[9]
SysID=4120
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0
RefreshTime=-1

;////////////////////////////////////////////////////////////////////////////////////////
;// Debug-Commands
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLCOMMAND_10000]
Descr=del_Filament_Q
SysID=1
DisplayName=DelFilamentQ

[CONTROLCOMMAND_10001]
Descr=del_Target_Ws
SysID=1
DisplayName=DelTargetJ

[CONTROLCOMMAND_10002]
Descr=Sys_errorquit
SysID=1
DisplayName=ResetSysErrArray

[CONTROLCOMMAND_10003]
Descr=HSG_errorquit
SysID=1
DisplayName=ResetHSGErrArray

[CONTROLCOMMAND_10004]
Descr=Tube_errorquit
SysID=1
DisplayName=ResetTubeErrArray

[CONTROLCOMMAND_10005]
Descr=Vac_errorquit
SysID=1
DisplayName=ResetVacErrArray

;////////////////////////////////////////////////////////////////////////////////////////
;// erweiterte Test-Variablen
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLVALUE_15000]
DisplayName=TMTApertureCurrentArray
Descr=BlendeAbtast
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.1
RefreshTime=1200
DataLen=300

[CONTROLVALUE_15001]
DisplayName=TMTTargetCurrentArray
Descr=TargetAbtast
DataType=4
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0.1
RefreshTime=1200
DataLen=300

[CONTROLVALUE_15002]
DisplayName=TMTIntegrationCount
Descr=burn_Anzahl
SysID=1
DataType=10
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15003]
DisplayName=TMTFocusVariation
Descr=burn_Ifocus
SysID=1
DataType=4
ValueType=1
Active=0
Notify=0
Hysterese=0.1
RefreshTime=250

[CONTROLVALUE_15004]
DisplayName=TMTFocusIntervall
Descr=burn_Ifocus_step
SysID=1
DataType=4
ValueType=1
Active=0
Notify=0
Hysterese=0.1
RefreshTime=250

[CONTROLVALUE_15005]
DisplayName=TMTUsedFocusPoints
Descr=abtast_ende
SysID=1
DataType=10
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15006]
DisplayName=TMTActFocusPoint
Descr=abtast_index
SysID=1
DataType=10
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15007]
DisplayName=TMTAccVoltage
Descr=burn_kV
SysID=1
DataType=4
ValueType=1
Active=0
Notify=0
Hysterese=1.0
RefreshTime=250

[CONTROLVALUE_15008]
DisplayName=TMTTubeCurrent
Descr=burn_mA
SysID=1
DataType=4
ValueType=1
Active=0
Notify=0
Hysterese=1.0
RefreshTime=250

[CONTROLVALUE_15009]
DisplayName=TMTResFocusOptMax
Descr=Focus_opt_max
SysID=1
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0.1
RefreshTime=250

[CONTROLVALUE_15010]
DisplayName=TMTResFocusOptMin
Descr=Focus_opt_min
SysID=1
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0.1
RefreshTime=250

[CONTROLVALUE_15011]
DisplayName=TMTResTargetAvgMax
Descr=TargetAverage_max
SysID=1
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0.1
RefreshTime=250

[CONTROLVALUE_15012]
DisplayName=TMTResTargetAvgMin
Descr=TargetAverage_min
SysID=1
DataType=4
ValueType=0
Active=0
Notify=0
Hysterese=0.1
RefreshTime=250

[CONTROLVALUE_15013]
DisplayName=TMTResult
Descr=TargetEinbrand
SysID=1
DataType=6
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15014]
DisplayName=BeamScanPointsPerLine
Descr=beamscan_anzahl
;//Variable wurde nach local verschoben
SysID=0
DataType=11
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15015]
DisplayName=BeamScanLineReady
Descr=beamscan_ready
;//Variable wurde nach local verschoben
SysID=0
DataType=6
ValueType=1
Active=1
Notify=1
Hysterese=0
RefreshTime=100

[CONTROLVALUE_15016]
DisplayName=BeamScanCurrentIntervall
Descr=beamscan_step
;//Variable wurde nach local verschoben
SysID=0
DataType=11
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15017]
DisplayName=BeamScanLineArray
Descr=beamscan_target
DataType=4
ValueType=1
;//Variable wurde nach local verschoben
SysID=0
Active=0
Notify=0
Hysterese=0.1
RefreshTime=1000
DataLen=501

[CONTROLVALUE_15018]
DisplayName=BeamScanXIndex
Descr=beamscan_x
;//Variable wurde nach local verschoben
SysID=0
DataType=11
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15019]
DisplayName=BeamScanYIndex
Descr=beamscan_y
;//Variable wurde nach local verschoben
SysID=0
DataType=11
ValueType=1
Active=0
Notify=0
Hysterese=0
RefreshTime=250

[CONTROLVALUE_15020]
Descr=Tube.wobstep
DataType=4
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0.5
RefreshTime=1000
DisplayName=WobbelStep

[CONTROLVALUE_15021]
Descr=I_tube_korr
DataType=4
ValueType=1
SysID=0
Active=0
Notify=0
Hysterese=0.5
RefreshTime=1000
DisplayName=TubeCorrCurArray[A]
DataLen=11

[CONTROLVALUE_15022]
Descr=Tube.hub
DataType=4
ValueType=1
SysID=1
Active=1
Notify=1
Hysterese=0.5
RefreshTime=1000
DisplayName=WobbelAmplitude

;////////////////////////////////////////////////////////////////////////////////////////
;// Commandos fuer erweiterte Testfunktionen
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLCOMMAND_15000]
Descr=PC_cmd.burn
DisplayName=StartTargetMaterialTest
SysID=1

[CONTROLCOMMAND_15001]
Descr=PC_cmd.beamscan
DisplayName=StartBeamScan
SysID=1

;////////////////////////////////////////////////////////////////////////////////////////
;// Stati fuer erweiterte Testfunktionen
;////////////////////////////////////////////////////////////////////////////////////////
[CONTROLSTATUS_15000]
DisplayName=TMTRunning
Descr=PLC_stat.bo_burn_is_running
SysID=1
Active=1
Notify=1
RefreshTime=250

[CONTROLSTATUS_15001]
DisplayName=BeamScanRunning
Descr=PLC_stat.bo_beamscan_is_running
SysID=1
Active=1
Notify=1
RefreshTime=250

[CPUTYPES]
I386="CP340 CP360 CP380 CP570 CP1483 CP1484 CP1583"
68000="IF260 CP260 CP430 CP476"

;////////////////////////////////////////////////////////////////////////////////////////
;// DATENMODULE
;////////////////////////////////////////////////////////////////////////////////////////
; 26.06.2003: ModuleNameIdxMethod 
;      0: alter Mechanismus (ModuleCount aus ini-Datei, 1-dim. Index)
;      1: [init-DM-Eintrag] (statisch, 1 Modul pro Init, z. B. hsg, tube) 
;      2: [init-DM-Eintrag / Init-Anz.] (statisch, mehrere Module pro Init, z. B. amp, cent) 
;      3: [Anz. init-DMs bzw. tubeheads (sollte gleich sein)] (statisch)
;      4: [Tubeheads] (1-dim., dyn.)
;      5: [Targets] (2-dim., dyn.)
;      6: [Modes] (3-dim., dyn.)
; Wenn ModuleNameIdxMethod=1 (z.B. cent, amp) dann wird der ModuleCount aus dem Eintrag im letzten init-dm ermittelt,
; es müssen dann diese Anz. Module angezeigt werden.
; Wenn ModuleNameIdxMethod=0 wird ModuleCount=0/1 gesetzt, es wird nur ein Modul angezeigt (und es gibt dann auch nur EINE
; Strukturvariable!)
; bei dyn. Modulen (mode, target) ergibt sich die anzuzeigende Anz. Module aus dem Wert der entspr. Variablen
; (z.B. cons_max, target_max)
;////////////////////////////////////////////////////////////////////////////////////////
; INIT-Datenmodule:
; Diese liefern die Informationen darüber, wieviele der anderen DMs insgesamt auf der RPS 
; vorhanden und welche gerade aktiv sind. Momentan soll es für jeden Röhrenkopf ein init-Datenmodul
; geben. Über einen dig. Eingang wird der jeweilige Röhrenkopf von der RPS erkannt --> Zu-
; weisung der Röhrenkopf-Nummer. Entspr. dieser Nummber wird ein init-DM angesprochen, in 
; welchem hinterlegt ist, welche DMs aktiviert werden sollen.
; Definition/Konvention: IM LETZTEN init-DM steht die ANZAHL der für jeden Typ auf der RPS
; vorhandenen DMs!
; init-DMs müssen nicht über eine PC-Applikation  angezeigt/konfiguriert werden!
;////////////////////////////////////////////////////////////////////////////////////////
[INITDM]
DisplayName=InitDM
SysID=1

[TUBEHEADDM]
DisplayName=TubeheadDM
SysID=1

[TARGETDM]
DisplayName=TargetDM
SysID=1

[TargetDM_Names]
Descr=target.Name[%d]
DataType=9
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=2000
DataLen=41

[MODEDM]
DisplayName=ModeDM
SysID=1

[ModeDM_Names]
Descr=Mode.Name[%d]
DataType=9
ValueType=1
SysID=1
Active=0
Notify=0
Hysterese=0
RefreshTime=2000
DataLen=16

[FILDM]
DisplayName=FilDM
SysID=1

[TUBEDM]
DisplayName=TubeDM
SysID=513

[AMPDM]
DisplayName=AmpDM
SysID=1

[HSGDM]
DisplayName=HSGDM
SysID=513

[VACDM]
DisplayName=VacDM
SysID=1

[CONDDM]
DisplayName=CondDM
SysID=1

[SYSDM]
DisplayName=SysDM
SysID=513

[FOCUSDM]
DisplayName=FocusDM
SysID=1

[CONSDM]
DisplayName=ConsDM
SysID=2

[SHUTDM]
DisplayName=ShutDM
SysID=32

[CENTDM]
DisplayName=CentDM
SysID=1

[TREGDM]
DisplayName=TRegDM
SysID=64

[SYSMANIDM]
DisplayName=SysManiDM
SysID=4120

[PARA_DM]
DisplayName=ParaDM
SysID=4120

[GEODM]
DisplayName=GeoDM
SysID=4120

[REFDM]
DisplayName=RefDM
SysID=4120

[DOORDM]
DisplayName=DoorDM
SysID=4120

[MOTIRISDM]
DisplayName=MotIrisDM
SysID=1024

[JSPEEDDM]
DisplayName=JSpeedDM
SysID=4120

[AXESWATCHDM]
DisplayName=AxesWatchDM
SysID=4120

[LOADPOSDM]
DisplayName=LoadPosDM
SysID=4120

[MANIPARADM]
DisplayName=ManiParaDM
SysID=4120

[TURNTABLEDM]
DisplayName=TurntableDM
SysID=4120

[CAMAXISDM]
DisplayName=CamAxisDM
SysID=4120

[ACTAXISDM]
DisplayName=ACTAxisDM
SysID=4120

[AIMMASKDM]
DisplayName=AimMaskDM
SysID=4120

[RELJOYDM]
DisplayName=RelJoyDM
SysID=4120