更新Release文件夹

ReleaseFiles/App.config

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="utf-8" ?>
+<?xml version="1.0" encoding="utf-8" ?>
 <configuration>
   <configSections>
     <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
@@ -11,11 +11,11 @@
     <add key="UserManual" value="UserManual.pdf" />
     <add key="DeviceId" value="PlanerCT001" />
 
-    <!-- 授权配置 | License configuration -->
-    <add key="License:LicenseMode" value="0" />
-    <add key="License:ModuleId" value="4" />
-    <add key="License:UseSma" value="false" />
-    <add key="License:LicenseState" value="20" />
+	<!-- 授权配置 | License configuration -->
+	<add key="License:LicenseMode" value="885" />
+	<add key="License:ModuleId" value="4" />
+	<add key="License:UseSma" value="false" />
+	<add key="License:LicenseState" value="20" />
 
     <!-- Serilog日志配置 -->
     <add key="Serilog:LogPath" value="D:\XPData\Logs" />
@@ -36,8 +36,8 @@
 
     <!-- 射线源配置 -->
     <!-- 射线源类型 | Ray Source Type -->
-    <!-- 可选值: Comet225 | Available values: Comet225 -->
-    <add key="RaySource:SourceType" value="Comet225" />
+    <!-- 可选值: Comet225, Simulated | Available values: Comet225, Simulated -->
+    <add key="RaySource:SourceType" value="Simulated" />
     <add key="RaySource:SerialNumber" value="SN08602861" />
     <add key="RaySource:TotalLifeThreshold" value="10" />
     <!-- PVI通讯参数 | PVI Communication Parameters -->
@@ -71,6 +71,10 @@
     <add key="Detector:Port" value="5000" />
     <add key="Detector:SavePath" value="D:\XPData\DetectorImages" />
     <add key="Detector:AutoSave" value="true" />
+	<!-- Simulated 探测器专属配置 | Simulated Detector Specific Configuration -->
+	<add key="Detector:Simulated:Width" value="256" />
+	<add key="Detector:Simulated:Height" value="256" />
+	<add key="Detector:Simulated:FrameRateFps" value="5" />
     <!-- Binning 模式: Bin1x1, Bin2x2, Bin4x4 | Binning mode: Bin1x1, Bin2x2, Bin4x4 -->
     <add key="Detector:Varex:BinningMode" value="Bin1x1" />
     <!-- 增益模式: Low, High | Gain mode: Low, High -->
@@ -128,6 +132,10 @@
     <!-- 自动重连 | Auto Reconnection -->
     <add key="Plc:bReConnect" value="true" />
 
+    <!-- 运动控制类型: PLC | Simulated | Motion control type -->
+    <!-- 切换为 Simulated 可在无硬件环境下验证运动控制链路 | Switch to Simulated to verify motion control without hardware -->
+    <add key="MotionControl:Type" value="Simulated" />
+
     <!-- 直线轴配置（单位：mm）| Linear axis config (unit: mm) -->
     <add key="MotionControl:SourceZ:Min" value="-500" />
     <add key="MotionControl:SourceZ:Max" value="500" />
@@ -171,6 +179,14 @@
     <add key="MotionControl:SourceDetectorZLinkage:TriggerThreshold" value="1.0" />
     <add key="MotionControl:SourceDetectorZLinkage:SpeedPercent" value="100" />
 
+    <!-- 重建通知配置 | Reconstruction Notification Configuration -->
+    <!-- 重建软件 IP（本机安装用 127.0.0.1）| Reconstruction software IP (use 127.0.0.1 for local) -->
+    <add key="Reconstruction:Host" value="127.0.0.1" />
+    <!-- 重建软件监听端口 | Reconstruction software listening port -->
+    <add key="Reconstruction:Port" value="11000" />
+    <!-- 重建模式: Planar(平面CT=2001), Vertical(立式CT=2002) | Mode: Planar=2001, Vertical=2002 -->
+    <add key="Reconstruction:Mode" value="Planar" />
+
     <!-- 报告输出文件夹路径（绝对路径）| Report output directory (absolute path) -->
     <add key="Report:OutputDirectory" value="D:\XPData\Report" />
     <!-- 报告模板文件路径（相对于应用程序目录或绝对路径）| Template file path (relative to app dir or absolute) -->
@@ -197,7 +213,6 @@
     <!-- 软件信息配置 | Software Information Configuration -->
     <add key="Report:SoftwareName" value="XplorePlane" />
     <add key="Report:SoftwareLogo" value="Templates\Logo2.png" />
-
   </appSettings>
   <startup>
     <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.8" />

ReleaseFiles/Host/XP.Hardware.RaySource.Comet.Host.exe.config

@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<configuration>
-  <runtime>
-    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
-      <dependentAssembly>
-        <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" />
-      </dependentAssembly>
-    </assemblyBinding>
-  </runtime>
-</configuration>